Specific Detection of Proteins by a Nanobody-Functionalized Nanopore Sensor.

Nanopores are label-free single-molecule analytical tools that show great potential for stochastic sensing of proteins. Here, we described a ClyA nanopore functionalized with different nanobodies through a 5-6 nm DNA linker at its periphery. Ty1, 2Rs15d, 2Rb17c, and nb22 nanobodies were employed to specifically recognize the large protein SARS-CoV-2 Spike, a medium-sized HER2 receptor, and the small protein murine urokinase-type plasminogen activator (muPA), respectively. The pores modified with Ty1, 2Rs15d, and 2Rb17c were capable of stochastic sensing of Spike protein and HER2 receptor, respectively, following a model where unbound nanobodies, facilitated by a DNA linker, move inside the nanopore and provoke reversible blockade events, whereas engagement with the large- and medium-sized proteins outside of the pore leads to a reduced dynamic movement of the nanobodies and an increased current through the open pore. Exploiting the multivalent interaction between trimeric Spike protein and multimerized Ty1 nanobodies enabled the detection of picomolar concentrations of Spike protein. In comparison, detection of the smaller muPA proteins follows a different model where muPA, complexing with the nb22, moves into the pore, generating larger blockage signals. Importantly, the components in blood did not affect the sensing performance of the nanobody-functionalized nanopore, which endows the pore with great potential for clinical detection of protein biomarkers.

Surface Plasmon Resonance Platforms for Chemical and Bio-Sensing

Light is being vastly explored towards favoring the advancement of technology and the improvement of the life quality of the population. Photonic materials that can manipulate light in a nanometric scale have become very competitive for the construction of chemical and bio sensors, mainly because they can be more sensitive, specific, and of a lower cost. Considering the serious health crisis experienced worldwide due to COVID-19, the importance of research in this field has become even clearer and greater. In this article, sensing platforms based on the exciting and promising plasmonic materials is broadly addressed. The sections covered here seek not just to introduce the theoretical concepts and state-of-the-art techniques, but also highlight the achieved advances and inspire future research on this rich and promising area. © 2023 Elsevier Ltd. All rights reserved

Single-walled silicon nanotube as an exceptional candidate to eliminate SARS-CoV-2: a theoretical study.

In this work, computational chemistry methods were used to study a silicon nanotube (Si192H16) as possible virucidal activity against SARS-CoV-2. This virus is responsible for the COVID-19 disease. DFT calculations showed that the structural parameters of the Si192H16 nanotube are in agreement with the theoretical/experimental parameters reported in the literature. The low energy gap value (0.29 eV) shows that this nanotube is a semiconductor and exhibits high reactivity. For nanomaterials to be used as virucides, they need to have high reactivity and high inhibition constant values. Therefore, the adsorption of 3O2 and H2O on the surface of Si192H16 (Si192H16@O2-H2O) was performed. In this process, the formation and activation energies were -51.63 and 16.62 kcal/mol, respectively. Molecular docking calculations showed that the Si192H16 and Si192H16@O2H-OH nanotubes bind favorably on the receptor-binding domain of the SARS-CoV-2 spike protein with binding energy of -11.83 (Ki = 2.13 nM) and -11.13 (Ki = 6.99 nM) kcal/mol, respectively. Overall, the results obtained herein indicate that the Si192H16 nanotube is a potential candidate to be used against COVID-19 from reactivity process and/or steric impediment in the S-protein.Communicated by Ramaswamy H. Sarma.

Nanoconjugated materials as sensors in point-of-care diagnostic tools: Detection of small molecules and viruses

Diagnostic point of care (POC) tools have seen important advances through the many materials introduced to enhance and validate their wide range applications. One of the most used POC tools are paper-based colorimetric formats. These POC are generally based on the use of antibody-antigen pairs interaction for the detection. However, small molecules can be a challenge for these formats and drastically reduce the sensitivity of POC. Therefore, novel conjugated materials using nanoparticles, polymers, and other composites have been developed which helped to tackle the sensitivity issues and, by using these materials, the portable sensors became more trustworthy for the detection of small molecules. These materials can be sculpted into various nanostructures and networks such as nanovesicles and nanogels with high biocompatibility and tunability. These are regarded as promising tools in the current and future lab-on-chip devices due to their accessibility and ease to manufacturing. In addition, the application of portable biosensing devices is of great importance in large-scale screenings of viruses including the coronavirus SARS-CoV-2 (responsible for the COVID-19 pandemic) or road control (i.e., substance of abuse). These approaches were made more accessible using smartphone-assisted analyses allowing for the decentralization of diagnosis. In this chapter, we present the latest findings in the development of polymeric-based materials and biosensors aimed for the detection of viruses and small molecules of drug abuse through simplified approaches including colorimetric paper-based assays and electrochemical sensors. The use of nano-scaled bioconjugated materials became an integral component in sensing applications due to their various structural advantages in producing highly sensitive tools that rival bench-top instruments. New developments in material design opened the door for decentralized dispensation of medicines and public protection that allows effective onsite and point-of-care diagnostics. © 2023 Elsevier B.V.

Synthesis of Microwave Functionalized, Nanostructured Polylactic Co-Glycolic Acid (nfPLGA) for Incorporation into Hydrophobic Dexamethasone to Enhance Dissolution.

The low solubility and slow dissolution of hydrophobic drugs is a major challenge for the pharmaceutical industry. In this paper, we present the synthesis of surface-functionalized poly(lactic-co-glycolic acid) (PLGA) nanoparticles for incorporation into corticosteroid dexamethasone to improve its in vitro dissolution profile. The PLGA crystals were mixed with a strong acid mixture, and their microwave-assisted reaction led to a high degree of oxidation. The resulting nanostructured, functionalized PLGA (nfPLGA), was quite water-dispersible compared to the original PLGA, which was non-dispersible. SEM-EDS analysis showed 53% surface oxygen concentration in the nfPLGA compared to the original PLGA, which had only 25%. The nfPLGA was incorporated into dexamethasone (DXM) crystals via antisolvent precipitation. Based on SEM, RAMAN, XRD, TGA and DSC measurements, the nfPLGA-incorporated composites retained their original crystal structures and polymorphs. The solubility of DXM after nfPLGA incorporation (DXM-nfPLGA) increased from 6.21 mg/L to as high as 87.1 mg/L and formed a relatively stable suspension with a zeta potential of -44.3 mV. Octanol-water partitioning also showed a similar trend as the logP reduced from 1.96 for pure DXM to 0.24 for DXM-nfPLGA. In vitro dissolution testing showed 14.0 times higher aqueous dissolution of DXM-nfPLGA compared to pure DXM. The time for 50% (T50) and 80% (T80) of gastro medium dissolution decreased significantly for the nfPLGA composites; T50 reduced from 57.0 to 18.0 min and T80 reduced from unachievable to 35.0 min. Overall, the PLGA, which is an FDA-approved, bioabsorbable polymer, can be used to enhance the dissolution of hydrophobic pharmaceuticals and this can lead to higher efficacy and lower required dosage.

Engineered Ferritin Nanoparticle Vaccines Enable Rapid Screening of Antibody Functionalization to Boost Immune Responses.

Employing monoclonal antibodies to target vaccine antigens to different immune cells within lymph nodes where adaptive immunity is initiated can provide a mechanism to fine-tune the magnitude or the quality of immune responses. However, studying the effects of different targeting antibodies head-to-head is challenging due to the lack of a feasible method that allows rapid screening of multiple antibodies for their impact on immunogenicity. Here self-assembling ferritin nanoparticles are prepared that co-display vaccine antigens and the Fc-binding domain of Staphylococcal protein A, allowing rapid attachment of soluble antibodies to the nanoparticle surface. Using this tunable system, ten antibodies targeting different immune cell subsets are screened, with targeting to Clec9a associated with higher serum antibody titers after immunization. Immune cell targeting using ferritin nanoparticles with anti-Clec9a antibodies drives concentrated deposition of antigens within germinal centers, boosting germinal center formation and robust antibody responses. However, the capacity to augment humoral immunity is antigen-dependent, with significant boosting observed for prototypic ovalbumin immunogens but reduced effectiveness with the SARS-CoV-2 RBD. This work provides a rapid platform for screening targeting antibodies, which will accelerate mechanistic insights into optimal delivery strategies for nanoparticle-based vaccines to maximize protective immunity.

Functionalized lipid-based drug delivery nanosystems for the treatment of human infectious diseases.

Infectious diseases are still public health problems. Microorganisms such as fungi, bacteria, viruses, and parasites are the main causing agents related to these diseases. In this context, the search for new effective strategies in prevention and/or treatment is considered essential, since current drugs often have side effects or end up, causing microbial resistance, making it a serious health problem. As an alternative to these limitations, nanotechnology has been widely used. The use of lipid-based drug delivery nanosystems (DDNs) has some advantages, such as biocompatibility, low toxicity, controlled release, the ability to carry both hydrophilic and lipophilic drugs, in addition to be easel scalable. Besides, as an improvement, studies involving the conjugation of signalling molecules on the surfaces of these nanocarriers can allow the target of certain tissues or cells. Thus, this review summarizes the performance of functionalized lipid-based DDNs for the treatment of infectious diseases caused by viruses, including SARS-CoV-2, bacteria, fungi, and parasites.

Amino‐terminated hyperbranched polymer functionalized graphene oxide with in situ trapped silver nanoparticles for high‐performance antibacterial nonwoven fabric

Antibacterial fabric with high thermal stability and mechanical strength is important for personalized protection, especially under the background of coronavirus pandemic (COVID‐19). This paper presents a facile approach toward high‐efficient antibacterial polypropylene spunbonded nonwoven fabrics (SNFs), which are decorated by a composite of graphene oxide embedded with silver nanoparticles (AgNPs/GO) through dip‐coating and in situ reduction effect of pre‐introduced amino‐terminated hyperbranched polymer (HBP‐NH2). Typically, HBP‐NH2 was grafted onto the GO nanosheets, then silver ions were trapped and self‐reduced by the HBP‐NH2 to generate silver nanoparticles decorated GO. The produced AgNPs are uniformly dispersed on the GO with a size of 13 nm. As an antibacterial coating, the Ag/GO composite could tightly wrap the SNFs fibers through the dip‐padding method, capable of enhancing the thermal stability and mechanical property of SNFs. The treated SNFs exhibited excellent antibacterial activities (~99.9%) against both Echerisia coli and Staphylococcus aureus, promising important potential for biomedical and personal protection applications.

Functionalizing Gold Nanostars with Ninhydrin as Vehicle Molecule for Biomedical Applications

In recent years, there has been an explosion in Gold NanoParticle (GNP) research, with a rapid increase in publications in diverse fields, including imaging, bioengineering, and molecular biology. GNPs exhibit unique physicochemical properties, including surface plasmon resonance (SPR) and bind amine and thiol groups, allowing surface modification and use in biomedical applications. Nanoparticle functionalization is the subject of intense research, with rapid progress being made towards developing biocompatible, multi-functional particles. In the present study, the photochemical method has been done to functionalize various-shaped GNPs like nanostars by the molecules like ninhydrin. Ninhydrin is bactericidal, virucidal, fungicidal, antigen-antibody reactive, and used in fingerprint technology in forensics. The GNPs functionalized with ninhydrin efficiently will bind to the amino acids on the target protein, which is of eminent importance during the pandemic, especially where long-term treatments of COVID-19 bring many side effects of the drugs. The photochemical method is adopted as it provides low thermal load, selective reactivity, selective activation, and controlled radiation in time, space, and energy. © 2022, Avestia Publishing. All rights reserved.

Functionalized Fullerene for Inhibition of SARS-CoV-2 Variants.

As virus outbreaks continue to pose a challenge, a nonspecific viral inhibitor can provide significant benefits, especially against respiratory viruses. Polyglycerol sulfates recently emerge as promising agents that mediate interactions between cells and viruses through electrostatics, leading to virus inhibition. Similarly, hydrophobic C60 fullerene can prevent virus infection via interactions with hydrophobic cavities of surface proteins. Here, two strategies are combined to inhibit infection of SARS-CoV-2 variants in vitro. Effective inhibitory concentrations in the millimolar range highlight the significance of bare fullerene's hydrophobic moiety and electrostatic interactions of polysulfates with surface proteins of SARS-CoV-2. Furthermore, microscale thermophoresis measurements support that fullerene linear polyglycerol sulfates interact with the SARS-CoV-2 virus via its spike protein, and highlight importance of electrostatic interactions within it. All-atom molecular dynamics simulations reveal that the fullerene binding site is situated close to the receptor binding domain, within 4 nm of polyglycerol sulfate binding sites, feasibly allowing both portions of the material to interact simultaneously.

Amino-terminated hyperbranched polymer functionalized graphene oxide with in situ trapped silver nanoparticles for high-performance antibacterial nonwoven fabric

Antibacterial fabric with high thermal stability and mechanical strength is important for personalized protection, especially under the background of coronavirus pandemic (COVID-19). This paper presents a facile approach toward high-efficient antibacterial polypropylene spunbonded nonwoven fabrics (SNFs), which are decorated by a composite of graphene oxide embedded with silver nanoparticles (AgNPs/GO) through dip-coating and in situ reduction effect of pre-introduced amino-terminated hyperbranched polymer (HBP-NH2). Typically, HBP-NH2 was grafted onto the GO nanosheets, then silver ions were trapped and self-reduced by the HBP-NH2 to generate silver nanoparticles decorated GO. The produced AgNPs are uniformly dispersed on the GO with a size of 13 nm. As an antibacterial coating, the Ag/GO composite could tightly wrap the SNFs fibers through the dip-padding method, capable of enhancing the thermal stability and mechanical property of SNFs. The treated SNFs exhibited excellent antibacterial activities (~99.9%) against both Echerisia coli and Staphylococcus aureus, promising important potential for biomedical and personal protection applications. © 2022 Wiley Periodicals LLC.

Light‐Driven Catalyst‐Free Access to Phthalazines: Entry to Antiviral Model Drugs by Merging Domino Reactions**

We report the development of a metal-free four-step one-pot synthetic strategy to access high-value functionalized phthalazines using o-methyl benzophenones as starting compounds. Combining a light-mediated enolization of o-methyl benzophenones/Diels-Alder reaction domino process with a subsequent deprotection/aromatization domino reaction in one-pot leads to sustainable and efficient organic synthesis. The tangible advantages, i. e., absence of catalysts or additives, utilization of commercially available and/or easily accessible substrates, mild reaction conditions, simplicity, and single work-up procedure, make this combined process highly appealing for the direct construction of various 1-aryl-phthalazines. Importantly, in vitro bioactivity evaluation of these newly prepared heterocyclic compounds demonstrated a strong antiviral efficacy against major human pathogens like HCMV and SARS-CoV-2.

Amine-Functionalized Silver Nanoparticles: A Potential Antiviral-Coating Material with Trap and Kill Efficiency to Combat Viral Dissemination (COVID-19).

The outbreak of COVID-19 has drastically affected the daily lifestyles of people globally where specific Coronavirus-2 transmits primarily by respiratory droplets. Structurally, the SARS-CoV-2 virus is made up of four types of proteins in which S-protein is indispensable among them, as it causes rapid replication in the host body. Therefore, the glycine and alanine composed of HR1 of S-protein is the ideal target for antiviral action. Different forms of surface-active PPEs can efficiently prevent this transmission in this circumstance. However, the virus can survive on the conventional PPEs for a long time. Hence, the nanotechnological approaches based on engineered nanomaterials coating on medical equipments can potentially prevent the dissemination of infections in public. Silver nanoparticles with tuneable physicochemical properties and versatile chemical functionalization provide an excellent platform to combat the disease. The coating of amine-functionalized silver nanoparticle (especially amine linked to aliphatic chain and trialkoxysilane) in its nanostructured form enables cloths trap and kill efficient. PPEs are a primary and reliable preventive measure, although they are not 100% effective against viral infections. So, developing and commercializing surface-active PPEs with trap and kill efficacy is highly needed to cope with current and future viral infections. This review article discusses the COVID-19 morphology, antiviral mechanism of Ag-NPs against SARS-CoV-2 virus, surface factors that influence viral persistence on fomites, the necessity of antiviral PPEs, and the potential application of amine-functionalized silver nanoparticles as a coating material for the development of trap and kill-efficient face masks and PPE kits.

Surface Plasmon Resonance Platforms for Chemical and Bio-Sensing

Light is being vastly explored towards favoring the advancement of technology and the improvement of the life quality of the population. Photonic materials that can manipulate light in a nanometric scale have become very competitive for the construction of chemical and bio sensors, mainly because they can be more sensitive, specific, and of a lower cost. Considering the serious health crisis experienced worldwide due to COVID-19, the importance of research in this field has become even clearer and greater. In this article, sensing platforms based on the exciting and promising plasmonic materials is broadly addressed. The sections covered here seek not just to introduce the theoretical concepts and state-of-the-art techniques, but also highlight the achieved advances and inspire future research on this rich and promising area.

Multifunctional surface functionalized magnetic iron oxide nanoparticles for biomedical applications: A review

Magnetic iron oxide nanoparticle-based multifunctional platforms have been explored extensively in biomedical applications. Modifications and integrations of IONPs with different entities viz. organic polymer, doping with inorganic materials, loading with drug, fluorescent dye, or antibodies make them appropriate for their application in broad spectrum of biomedical fields. This review presents and summarizes the fabrication strategies of multifunctional magnetic nanoparticles based on the modification and surface functionalization of MNP. Multifunctional IONPs based recent advances covering a wide array of applications like biosensing and pathogen detection, magnetic resonance imaging (MRI) and biomarker tracking, magnetofection and gene therapy, hyperthermia and chemotherapy, drug delivery and targeted cell killing, bioimaging and therapeutics, stem cell detection and therapy, tissue engineering and organ transplant, nano-vaccines and immune system activation, microbe targeting and destruction, and COVID19 management are also covered.

A Supramolecular Approach to Antimicrobial Surfaces.

In this paper, we report on the preparation of Imidazole-functionalized glass surfaces, demonstrating the ability of a dinuclear Cu(II) complex of a macrocyclic ligand to give a "cascade" interaction with the deprotonated forms of grafted imidazole moieties. In this way, we realized a prototypal example of an antimicrobial surface based on a supramolecular approach, obtaining a neat microbicidal effect using low amounts of the described copper complex.

Advancement and Challenges of Biosensing Using Field Effect Transistors.

Field-effect transistors (FETs) have become eminent electronic devices for biosensing applications owing to their high sensitivity, faster response and availability of advanced fabrication techniques for their production. The device physics of this sensor is now well understood due to the emergence of several numerical modelling and simulation papers over the years. The pace of advancement along with the knowhow of theoretical concepts proved to be highly effective in detecting deadly pathogens, especially the SARS-CoV-2 spike protein of the coronavirus with the onset of the (coronavirus disease of 2019) COVID-19 pandemic. However, the advancement in the sensing system is also accompanied by various hurdles that degrade the performance. In this review, we have explored all these challenges and how these are tackled with innovative approaches, techniques and device modifications that have also raised the detection sensitivity and specificity. The functional materials of the device are also structurally modified towards improving the surface area and minimizing power dissipation for developing miniaturized microarrays applicable in ultra large scale integration (ULSI) technology. Several theoretical models and simulations have also been carried out in this domain which have given a deeper insight on the electron transport mechanism in these devices and provided the direction for optimizing performance.

Drug delivery of amoxicillin molecule as a suggested treatment for covid-19 implementing functionalized mesoporous SBA-15 with aminopropyl groups.

SARS-CoV-2 is a novel coronavirus that was isolated and identified for the first time in Wuhan, China in 2019. Nowadays, it is a worldwide danger and the WHO named it a pandemic. In this investigation, a functionalization post-synthesis method was used to assess the ability of an adapted SBA-15 surface as a sorbent to load the drug from an aqueous medium. Different characterization approaches were used to determine the characterization of the substance before and after functionalization such as X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM), nitrogen adsorption-desorption porosimetry (Brunauer-Emmett-Teller) BET surface area analysis, and thermal gravimetric analysis (TGA). Batch adsorption testing was carried out in a single adsorption device to find the impact of multiple variables on the drug amoxicillin charge output. The following parameters were studied: 0-72 hr. contact time, 20-120 mg/l initial concentration, and 20-250 mg of NH2-SBA-15 dose. The outcomes from such experiments revealed the strong influence and behavior of the amino-functional group to increase the drug's load. Drug delivery outcomes studies found that amoxicillin loading was directly related to NH2-SBA-15 contact time and dose, but indirectly related to primary concentration. It was observed that 80% of amoxicillin was loaded while the best release test results were 1 hour and 51%.

Latest Trends in Lateral Flow Immunoassay (LFIA) Detection Labels and Conjugation Process.

LFIA is one of the most successful analytical methods for various target molecules detection. As a recent example, LFIA tests have played an important role in mitigating the effects of the global pandemic with SARS-COV-2, due to their ability to rapidly detect infected individuals and stop further spreading of the virus. For this reason, researchers around the world have done tremendous efforts to improve their sensibility and specificity. The development of LFIA has many sensitive steps, but some of the most important ones are choosing the proper labeling probes, the functionalization method and the conjugation process. There are a series of labeling probes described in the specialized literature, such as gold nanoparticles (GNP), latex particles (LP), magnetic nanoparticles (MNP), quantum dots (QDs) and more recently carbon, silica and europium nanoparticles. The current review aims to present some of the most recent and promising methods for the functionalization of the labeling probes and the conjugation with biomolecules, such as antibodies and antigens. The last chapter is dedicated to a selection of conjugation protocols, applicable to various types of nanoparticles (GNPs, QDs, magnetic nanoparticles, carbon nanoparticles, silica and europium nanoparticles).

Functionalization of Porphyrins Using Metal-Catalyzed C–H Activation

The review is devoted to the C–H functionalization of porphyrins. Porphyrins exhibit the properties of organic semiconductors, light energy converters, chemical and electrochemical catalysts, and photocatalysts. The review describes the iridium- and palladium-catalyzed direct functionalization of porphyrins, with more attention given to the results obtained in our laboratory. The development and improvement of synthetic methods that do not require preliminary modification of the substrate with various functional groups are extremely important for the preparation of new organic materials based on porphyrins. This makes it possible to simplify the synthetic procedure, to make the synthesis more economical, environmentally safe, and simple to perform.